Bluetooth
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the
button on the remote to switch to Bluetooth Mode, indicated by a slowly ashing blue light.
You can also press the Source button on the side of the unit.
3. Press and hold the Pair button on the side of the unit for 3 seconds.
The pairing indicat
4. Use the controls on your Bluetooth device to select NVR-840MSBBU in your Bluetooth settings to pair.
If your device requests a password, enter the default password 0 0 0 0 .
Refer to the user's manual for your sp
5.
When successfully paired and connected, a beep will issue from the unit and the Pairing Indicator will
display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the
device. If your device should become unpaired or y
Pl
aying Audio Wirelessly
1. After pairing to a bluetooth device, use the controls on the connected Bluetooth Device to select a track.
2. Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the
soundbar's remote.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.
TROUBLESHOOTING GUIDE:
Problem
What to do
Check the connection of the AC/DC adapter
No power
between the speaker and wall outlet.
Check if the cable is NOT connected to the input
No sound when
connected with
connector in television or other device
television or other
Check that it is NOT set to mute.
device
Inspect or replace the battery.
The remote control
won' t work
Make sure there are no obstacles obscuring the
front of the Speaker.
Check if you have pairing or not. It needs to pair
No sound during
Bluetooth mode
the external BT player and the speaker with
password "0000" before 1st time listening.
blue quickly. When pairing of the unit , remain within 3 feet of the unit.
device for instructions on pairing and connecting Bluetooth devices.
GENERAL SPECIFICATIONS:
Power Source :.........................
Power Source of Remote Control:..........................DC
Power Consumption:....................................>30W
Audio Power(MOVIE MODE) :
Left Channel ................................................10W
Right Channel...............................................10W
Impedance of Speakers :
Left Channel ....................................... 8 Ohm,15W
Right Channel..................................... 8 Ohm,15W
Dimensions....................................495 x 80 x 80mm
22
ble to connect, repeat the above steps.
DC
1X CR 2025 battery (Included)
15V 1.2A ,
3V,