Technical Specifications; Additional Information - Klip Xtreme BigBash KWS-920 Manual De Instrucciones

Technical specifications

MPN
Type
Peak music power output
Reference RMS
DC input
Speaker
Driver units
Frequency
Impedance
Sensitivity
Signal to noise ratio
Microphone
Connectivity
Directivity
Frequency
Impedance
Sensitivity
Connectivity
Connection type
Memory card slot
Wireless RF frequency
Wireless range

Additional information

LED illumination
Dimensions
Weight
Cable length
Warranty
KWS-920
4.1 channel party loudspeaker system
6000W
600W
35.5V
Five total:
one 12-inch
two 5-inch
two 2-inch
Subwoofer: 20Hz-170Hz
Speakers: 120Hz-20kHz
12-inch: 3
5-inch: 4
2-inch: 4
1000mV
≥70dB
Two wireless microphones
Heart-shaped
40Hz-15kHz
630
5dBµV
Auxiliary, Bluetooth compatible, two 1/4in jacks and tuner
®
USB
2.4GHz
33ft
Six different lighting schemes
(W)15.03x(H)30x(D)17.87in
29.7lb
5.08ft
One year
Precautions
• Do NOT use this unit for anything other than its intended use.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long periods of time.
• Do NOT expose the speaker to rain or water, and avoid environments with high humidity or dust.
• Do NOT disassemble, repair or modify the speaker yourself.
There are no user serviceable parts inside the unit. Only qualified personnel should be allowed to perform
repairs without voiding the warranty.
• Do NOT use cleaning products that contain benzene, solvents or alcohol.
• Do NOT use near a microwave oven or wireless LAN products.
• Do NOT place containers with liquid on top or near the speaker.
• Do NOT place objects which are sources of heat on the speaker cabinet such as lighting equipment or
smoke machines.
• The device must be placed on a flat and stable surface.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.