Shooting, Viewing, and Erasing
Shooting with optimum
aperture value and shutter
speed (K mode)
In this mode, automatic camera shooting can
be used while also allowing changes to a wide
range of other shooting menu functions, such as
exposure compensation, white balance, and so
on when needed.
1
Set the mode dial to K.
2
Press the n button to turn on
the camera.
P
12
N
ORM
Press the n button again to turn off
the camera.
8
EN
Number of storable
still pictures (p. 67)
M
IN
Monitor
(standby mode screen)
3
Hold the camera, and compose the
shot.
When holding the camera, take care not to
cover the flash with your fingers, etc.
4
Press the shutter button halfway
down to focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
4
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
Press halfway
"Focusing" (p. 61)
P
Monitor
1/400
F3.5
Horizontal grip
Vertical grip
P
1/400
1/400
F3.5
F3.5
AF target mark
Shutter speed
Aperture value