Shooting, Playback, And Erasing - Olympus FE-3010 Manual Básico

Setting the date and time
The date and time set here are saved to image fi le
names, date prints, and other data.
1
Press the n button to turn on the
camera.
●
The date and time setting screen is displayed
when the date and time are not set.
X
Y
----
CANCEL
Date and time setting screen
2
Use kl to select the year for [Y].
3
Press n to save the setting for [Y].
4
As in Steps 2 and 3, use klmn and
the B button to set [M] (month), [D] (day),
[TIME] (hours and minutes), and [Y/M/D]
(date order).
Changing the display language
The language for the menu and error messages
displayed on the monitor is adjustable.
1
Press the m button, and press
klmn to select [E] (SETUP).
EXIT
2
Press the B button.
3
Use kl to select [W] and press
the B button.
4
Use klmn to select your language
and press the B button.
5
Press the m button.
M D TIME
-- -- -- -- Y M D
MENU
SETUP
SET OK
MENU
Shooting, Playback, and
Erasing
Shooting with the optimum
aperture value and shutter speed
( P mode)
In this mode, automatic shooting settings are
activated while also allowing changes to a wide
range of shooting menu functions such as exposure
compensation, white balance, etc. as needed.
1
Press the n button to turn on the
camera.
If P mode is not displayed, press the K button
several times to select it.
Press the n button again to turn off the
camera.
2
Hold the camera and compose the shot.
3
Press the shutter button halfway down to
focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
P
Press halfway
Shutter speed
4
To take the picture, gently press the
shutter button all the way down while
being careful not to shake the camera.
Viewing images
1
Press the q button.
2
Use klmn to select an image.
Displays
10 frames before
the current image
Displays previous
image
AF target mark
1/400 F3.1
Aperture value
Displays next
image
Displays
10 frames after
the current image
EN 3