Managing Multiple Secondary Sources; Setting The Priority (Bt-Aux) Switch - Bose A20 Guia Del Usuario

Ocultar thumbs Ver también para A20:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Managing multiple secondary sources

The headset can connect one AUX (wired) source and up to two Bluetooth
(wireless) sources at a time.
If you are likely to receive important information from a particular secondary source
(such as a GPS or a warning system), you can assign priority to that source. This
insures that incoming audio from the priority source will always override other
source.

Setting the Priority (BT-AUX) switch

To assign priority to one of your secondary sources:
1.
Locate the Priority (BT-AUX) switch inside the battery compartment.
2.
Set the switch to the correct source (BT or AUX) as shown below.
Bluetooth source
When the switch is in the BT
position, the Bluetooth source
will override the AUX source if
a signal is detected.
Note: Incoming and outgoing phone calls will always override any other secondary
source.
Using the Headset
ON - OFF
AUTO ON
AUTO OFF
ON - OFF
AUX source
When the switch is in the AUX
position, the AUX source will
override the Bluetooth source if
a signal is detected.
®
English - 25

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido