Hdd Player Operation (Optional); Listening To Music Of Hdd; Sat Radio Receiver (Optional); Receiving Channels With The Sat Receiver (Optional) - Alpine IVA-D100 Manual De Instrucciones

HDD Player
Operation
(Optional)

Listening to Music of HDD

This device is controllable from the unit when Alpine HDD player is
connected.
1
Press SOURCE/POWER.
The source selection screen appears.
2
Touch [ ] of MMDRIVER.
The MMDRIVER mode main screen appears.
3
Select the desired music by touching [
[ ].
Searching: Touch [
Fast-forward/reverse: Touch and hold [
4
Touch [ / ] to temporarily stop the music
currently playing.
Touch [ / ] again to resume the play.
50
-EN
] or
] or [ ].
] or [
SAT Radio Receiver
(Optional)
SAT Receiver: XM or SIRIUS Receiver
When an optional XM or SIRIUS Receiver Box is connected
via the Ai-NET bus, the following operations may be
performed. However, the XM Receiver and SIRIUS Receiver
cannot be connected at the same time.
Receiving Channels with the SAT
Receiver (Optional)
About SAT Radio
Satellite Radio* is the next generation of audio entertainment, with over
to 100 digital channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-coast via satellite.
For more information, visit XM's website at www.xmradio.com., and
SIRIUS' website at www.sirius.com.
To receive SAT Radio, the separately sold XMDirect™ or SIRIUS
].
Satellite Radio Tuner and an appropriate Ai-Net Interface Adapter will
be required. For details, consult you nearest ALPINE dealer.
* XM and its corresponding logos are trademarks of XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks of SIRIUS
Satellite Radio Inc.
• The SAT Receiver controls on the IVA-D100 are operative only when
a SAT Receiver is connected.
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Touch [ ] of XM or SIRIUS.
The XM or SIRIUS main screen display appears.
3
Press BAND to select the desired band.
XM radio:
XM-1 XM-2
SIRIUS radio:
SIRIUS-1 SIRIUS-2
4
Touch [TUNE] to select the channel number tuning.
Each time it is pressed, the tuning mode is changed.
channel number tuning
5
Touch [ NO.] / [NO.
[NAME ] to select the desired channel. Holding
either button down will change channels
continuously.
• To customers when connecting the SIRIUS Tuner Box:
For detailed functions, refer to the SIRIUS Tuner Box installation
manual.
XM-3 XM-1
SIRIUS-3 SIRIUS-1
channel name tuning
] or [ NAME] or