Publicidad
Idiomas disponibles
Idiomas disponibles
1 Ensure the unit is plugged in and power is
available.
2 Be sure the batteries are inserted correctly in the
remote control (the lights on the remote control
will be on).
pressing the Clock button.
4 Point the remote control to the indoor unit and
press ON/OFF button to turn the unit on.
The default operating mode is AUTO. Once you
select the operating mode with remote control,
the operating conditions will be saved in the
indoor unit's microcomputer memory. The next
time the air conditioner will start operating under
the same conditions when you simply push the
ON/OFF button of the remote control.
In case of energy cut off or product shut down
when removing the power cord, or even when
changing the remote control batteries the
microprocessor will return back to the AUTO
mode.
When the AUTO mode is selected, the air
conditioner will automatically select COOL, HEAT
(if applicable), or FAN only operation, depending on
the programmed and/or the room temperature.
1
Press this button to turn the air conditioner on.
The temperature indicator on the indoor unit
display lights on.
2
Press to select AUTO.
1
Press this button again to turn the air conditioner
off. The horizontal louver returns back to the
position upon shut down.
If the AUTO mode is uncomfortable, you can
select the desired conditions manually.
The DEHUMIDIFY mode works based on the
difference between the set temperature and the
actual room temperature.
The temperature is regulated while dehumidifying
through repeatedly turning on/off of the COOLING
operation or FAN only operation.
Programmed temp.
Dehumidifying Operation
12
Publicidad
