Acoustic Research HT60 Manual De La Instalación Y De La Operación página 47

Installing the Adjustable Spike Feet
1. Turn the receiver over, being careful not to scratch the top surface.
2. Turn hex nut to adjust spiked foot to desired height.
3. Insert threaded spike foot into one of the specified holes in the base of the
receiver.
4. Turn the spike foot clockwise until tightened. Repeat for second receiver.
FIGURE 2 - Installing the Adjustable Spike Feet
5. Turn receiver over and place spike feet inside flat metal holders, if desired.
FIGURE 3 - Adjustable Spike Feet Installed
ON OFF ON OFF
AUDIO
L R
OFF
D C IN D C I N
LINK
page 5
WHT24