Operating The Unit; Switching The Tv On And Off - TechniSat TechniVision 22 HD Guía Rápida De Funcionamiento

7 Operating the unit

7.1 Switching the TV on and off

7.1.1 Switching on using the mains power switch on the TV
(only with the TechniVision 26/32 HD)
Switch the TV on by pressing in the mains power switch (see page 3 #9).
>
The TV now performs an initialisation and cannot be operated during this time. This
process takes several seconds to complete.
7.1.2 Switching on from standby mode
Switch the TV on by pressing the On/Standby button or the Channel +/- keys or a
>
numeric key between 0 and 9 on the remote control.
The operating mode is displayed by the green LED, where this is activated in the main
menu under Settings > Basic settings.
If the user-dependent parental control (TechniFamily) is activated, the user selection
now appears as per point 7.1.3 in the quick start manual.
7.1.3 Switching off to standby mode
Switch the TV off by pressing the On/Standby button.
>
When switching off the TV, please note that a check takes place as to whether a new
operating software version or channel list is available. This process takes several
seconds to complete. The LCD panel is already switched off during the test.
The device switches completely into standby mode after completion of the test. The TV
is now in standby mode and can be completely switched off using the mains power
switch. The LED lights up red in standby mode or the time appears in the display,
where this is activated in the main menu under Settings > Basic settings.
7.1.4 Switching off using the mains power switch on the TV
(only with the TechniVision 26/32 HD)
The television is switched off completely by pressing the mains power switch.
>
If this is the case, neither automatic software and SFI data updates nor recording or
alarms will function.
The TV notes the last 'On' or 'Off' switching status entered using the remote control.
If the TV was switched off at the mains power switch during operation, it is switched
straight back to standby mode by pressing the mains power switch.
If a power failure took place during operation, you should switch off the television using
the mains power switch so that it is not switched on again unintentionally as soon as
the power is available again.
23
Switching on/off