Product Description; User Instructions - BERGNER Masterpro by Carlo Cracco BEG001021NOC Instrucciones De Uso

The plastic parts of the pressure cooker can be damaged due to excess heat; therefore
this situation is not included in the guarantee of the manufacturer.
Extra Features
• Cooking valve that has two different locations
• Specially designed mechanism for quick pressure discharge.
• Heat-insulated handles
• Compact thermo-sandwich for the most suitable heat distribution
• Easy open-close system with a safety lock
• 18/10 Cr/Ni stainless steel pressure cooker and lid
• Suitable base for all stoves

PRODUCT DESCRIPTION

2.1. Product explanatory
Gradual
cooking valve
Steam
discharge
Gasket
Clips
P·14
Lid release lever
Closing button
Air valve and safety lock
Safety valve bolt
Cooker valve bolt
2.2. Product
descriptions
Stainless steel
cooker pot
Thermo-Sandwich
base

USER INSTRUCTIONS

3. User Instructions
3.1 Opening the lid of the pressure cooker
3.1 Opening the lid of the pressure cooker
• When the cooking valve is in the "steam discharge" position, lift the lid opening and
closing handles upwards to open the clamps to both sides. Lift the lid off the cooker.
• Before first use: Disassemble the silicone gasket from the lid, and rinse the gasket in
boiling water, dry it, and place it in the correct place.
Note: Make sure that the silicone gasket is placed correctly. If it is not placed correctly,
the necessary pressure cannot be obtained. The silicone seal should not be twisted and
it must be firmly placed to the rim of the lid (without any gaps between the seal and the
stainless steel lid).
• As a general rule, the position of the silicone gasket must be controlled before using
the cooker. The long side of the gasket should be placed between the bottom side of
the lid and the cooker.
Gasket right position
INSTRUCTIONS FOR USE
Cooker handle
Gasket wrong position
EN
P·15