Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

1. ASSEMBLY INSTRUCTIONS.-
1. Take the unit out of its box and make
sure that all of the pieces are there:
ATTENTION: The assistance of a
second person is recommended
when assembling this machine
Fig.1 Parts list
(26)
Main body.
(41L)
Pedal L.
(41R) Pedal R.
(42L)
Pedal tube L.
(42R) Pedal tube R.
(86)
Rear stabiliser.
(105)
Front stabiliser.
(6L)
Left upper arm.
(6R)
Right upper arm.
(12L)
Left lower focus arm.
(12R) Right lower focus arm.
(56L)
Left pedal support tube.
(56R) Right pedal support tube.
(73L)
Rail L.
(73R) Rail R.
(15)
Main post.
(75)
Conection tube.
(119)
Fixed handlebar.
(98)
Cover.
(36L)
Front left cover.
(36R) Front right cover.
(5R1) Front right arm cover.
(5R2) Back right arm cover.
(5L1)
Front left arm cover.
(5L2)
Back left arm cover.
(65)
Cover.
(1)
Console.
(112)
Rotation rod.
(134)
Adapter.
Fig.2 Screws and fasteners.
(9)
Screw M8x20.
(10) Washer D8.3xD12.7x2.2.
(53) Flat washer D8.5xD19x1.5.
(62) Screw M8x40.
(61) Tube spacer.
(40) Screw M8x20.
(79) Washer D8.5xD19x1.5.
(47) Flat washer D8.5xD24x2.
(43) Screw M10x60.
(17) Flat washer D10.5xD19x2.
(16) Nut M10.
(52) Screw M8x20.
(104) Screw M8x55.
(111) Screw M8x20.
(4)
Screw M4x15
(100) Washer D20.5xD25x0.5.
Wrenches.
2. FITTING THE STABILISER
BARS.-
ATTENTION: The assistance of a
second person is required for this
stage of the assembly.
Bring the front stabiliser (105) close to
the main body (26), Fig. 3. Fit the
screws (104), and the washers (53).
Bring the left (73L) and right (73R)
rails close to the rear stabiliser (86) as
shown in Fig. 3. Insert screws (78),
washers (10), (53) and nuts (51) and
tighten securely.
Place
the
between the rails (73L) and (73R)
using the screws (78), the washers
(10), (79) and tighten securely, Fig.3.
Join the rear stabiliser (86) to the
central body (26) using the screws
(52), the washers (10), (53) and (79),
Fig. 3.
IMPORTANT: It is advisable to
retighten these screws after one
month of using the machine.
3. FITTING THE MAIN POST.-
Bring the main post (15) up to boss on
the main body (26), Fig.4, connect the
terminals (2) and (110), Fig.4, I.
19
connection
tube
(75)

Publicidad

loading