Secondary Filter; Filters - Hoover U5140900 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

filter baG:
how to replace
CAUTION
!
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
4.1 To change filter bag, push down at top of bag
door and pull door forward. Remove door.
4.2 Grasp filter bag collar (A) and pull collar from
tube (B).
IMPORTANT
Do not clean out old filter bag and reuse.
Discard used filter bag.
Hold new filter bag as shown. Align opening in
filter bag with (B). Push (A) firmly onto (B). Tuck
in filter bag.

filters:

how to Clean
CAUTION
!
!
To reduce the risk of injury from moving parts,
unplug vacuum before servicing.
Do not operate cleaner without either the
secondary or final filter in place.

secondary filter

4.4 The secondary filter (A), located behind the grill
in the bottom of bag compartment, protects the
motor from dirt particles.
If filter becomes dirty, pull off grill and lift out filter.
Hand wash filter in cold water with mild detergent,
then air dry. Reposition dry filter and grill.
what to buy
Use only genuine HOOVER
®
Secondary Filter
with your vacuum. When purchasing a new
Secondary Filter, ask for HOOVER
®
Part no.
38765-019.
final filter
The final filter assists in the filtration process to
return clean air to the room.
4.5 To remove this filter when it be-comes dirty,
remove bag door and pull down top of filter.
4.6 Lift out filter (B) and hand wash it in cold water
with mild detergent.
Let filter air dry and reposition it on the side of the
cleaner. Reposition bag door.
what to buy
Use only genuine HOOVER
®
Final Filter with
your vacuum. When purchasing a new Final
®
Filter, ask for HOOVER
Part no. 40110-004.
4.1
4.2
4.3
4.3
Reposition
bag
door by placing tabs on
bottom of door into
opening (C).
Press top of door to
snap securely shut.
C
4.4
a
4.5
4.6
11
b
a
b

Publicidad

Tabla de contenido
loading

Tabla de contenido