Cleaning Tools; Important - Hoover U5140900 Manual Del Propietário

3. tOOls

CleaninG tOOls

Tools allow for cleaning surfaces above the floor
and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in
upright position.
reMOVinG hOse
When using cleaning tools, cleaner handle should
be in the upright position. Also, turn cleaner OFF
before disconnecting and connecting hose to hose
tube (A).
To use hose, lift hose end as shown.
seleCt prOper tOOl
3.2
b
a
C
d
attaCh wand and tOOls
Attach tool, wand or crevice tool* to the hose (H) by
pushing it firmly into the hose. Attach second wand,
tool or crevice tool* to the wand in the same man-
ner.
Twist wand or tool slightly to tighten or loosen the
connection.
For models with crevice tool, the dusting brush (I)
can be attached to the crevice tool*.
*Available on select models only.

IMPORTANT

Brushroll continues to turn while product is
turned on and handle is in upright position. To
avoid damage to carpet, rugs, furniture and
flooring, avoid tipping cleaner or setting it on
furniture, fringed area rugs, or carpeted stairs
during tool use.
3.1
a
A. Dusting brush may be used for carved furniture,
table tops, books, lamps, lighting fixtures, venetian
blinds, baseboards, shutters, and registers.
B. Furniture nozzle may be used for upholstered
furniture, draperies, mattresses, clothing, automobile
interiors, and carpeted stairs.
C. Crevice tool* may be used in tight spaces,
corners and along edges in such places as dresser
drawers, upholstered furniture, stairs and
baseboards.
D. Extension wands are used to give extra length to
your hose. Use them with any of the above tools.
*Available on select models only.
hOw tO
Clean tOOls
3.3
H
To clean the hose, wipe
off dirt with a cloth
dampened in a mild
detergent. Rinse with a
damp cloth.
Cleaning tools may be
I
washed in warm water
with a detergent. Rinse
and air dry before
using.
9