Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
18 - Use external connection cables.
- When the tool is used outside, only use extension
leads intended for external use and with
corresponding marking.
19 - Remain vigilant.
- Watch what you are doing, demonstrate common
sense and do not use the tool when you are tired.
20 - Check damaged parts.
- Before using the tool for other purposes, examine
it carefully to determine whether it will operate
correctly and accomplish its planned function.
- Check the alignment or locking of the moving
parts, and the absence of any broken parts or any
fixing and other conditions that are likely to affect
the operation of the tool.
- A protective guard or other damaged part should
be repaired or replaced by an approved
maintenance centre, unless stated otherwise in this
instruction manual.
- Have defective switches replaced by an approved
maintenance centre.
- Do not use the tool if the switch does not permit
change from the on state to the off state.
21 – Warning.
- The use of any accessory or any fixing other than
that or those recommended in this instruction
manual can present a risk of injury to persons.
22 - Have the tool repaired by a qualified person.
- This electric tool satisfies the corresponding safety
rules. Repairs should only be made by qualified
persons using original spare parts. Not doing this
can expose the user to significant danger.
as well as the additional safety instructions.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
suffocation!
Symbols:
Read manual before use.
Wear eye protection.
Always wear a dust mask.
In accordance with essential
applicable safety standards
of European directives
ADDITIONAL SAFETY INSTRUCTIONS
FOR SANDERS
Observe the applicable regulations when
■
sanding painted surfaces.
Whenever possible, use a vacuum extractor
■
for dust collection.
Remove dust and other waste material in an
■
environmentally safe way.
Always wear a dust mask.
■
Take special care when sanding lead based paint:
■
- All persons entering the work area, must
wear a mask specially designed for protection
against lead paint dust and fumes.
- Children and pregnant women must not
enter the work area.
- Do not eat, drink or smoke in the work area.
Always unplug the machine before performing
■
any maintenance.
Do not use the machine before it has been
■
completely assembled and installed
according to the instructions.
Do not perform any design, assembly or
■
construction activities on the table while the
machine is switched on.
Unplug the machine and clean the table before
■
leaving the work area.
Warning / Danger!
Wear ear protection.
20
Publicidad
Tabla de contenido
