Carpet Height Adjustment; Select Proper Tool; Removing Hose; Tools - Hoover WindTunnel High Capacity Upright Pet Instrucciones De Funcionamiento Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

carpet heiGht adJustMent

2.4
Tools allow for cleaning surfaces
above the floor and for reaching hard
to clean areas.
The vacuum is ready for tool use
when handle is in upright position.

select proper tool

(Tools may vary per model)
3.1
A
C

reMovinG hose

3.2
CAUTION
!
Not to be used for grooming a pet.
A

3. tools

Brushroll continues to turn while product is turned on and handle
is in upright position. To avoid damage to carpet, rugs, furniture
and flooring, avoid tipping cleaner or setting it on furniture,
fringed area rugs, or carpeted stairs during tool use.
b
D
To remove hose for tool
use, press the hose
release button and pull
hose end out.
To lock back into place,
push hose into hose
tube until you hear a
click.
!
2.4 To adjust height setting, TURN knob (A) to
desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
• LOW setting for all types of carpet, for bare
floors turn dial to "Hard Floor" setting.
• Higher settings: for very deep pile carpet,
where easier pushing effort is desired, while
maintaining good cleaning performance.

IMPORTANT

If the vacuum is difficult to push, push down and
turn knob to the next higher setting.
IMPORTANT
A. Use Upholstery Tool to clean upholstered
furniture, draperies, mattresses, clothing, and car-
peted stairs. (Tool varies per model)
B. Powered Hand Tool may be used for upholstered
furniture, draperies, mattresses, clothing, and car-
peted stairs. (Tool varies per model)
C. Wand is used to give extra length to your hose.
Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as dresser
drawers, upholstered furniture, stairs and base-
boards.

attach wand and tools

3.3
7
Actual model may vary from images shown.
!
WARNING
Unplug vacuum before
connecting Powered
Hand Tool.
To attach tool or wand to
hose, push firmly into
place.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido