Daintree GE current LIS Serie Guia De Instalacion página 9

Lumination LIS Series
®
Dimming line
Dimming line
(op�onal)
(op�onal)
3
Optional dimmer: Install UL listed electrical fitting
and insert dimming control wires through. Connect
dimming control wires (grey and violet for 0-10V or
violet and violet/white stripe for DALI) to the similarly
colored fixture wires using the provided push-in wire
nuts (starter unit) or using wire nuts (starter kit).
Purple, grey Purple, grey
Purple, grey Green, black, white Green, black, white
Green, black, white
Brown, brown-white Brown, brown-white
Brown, brown-white
Pull out
Pull out Pull out
con�nuous
con�nuous con�nuous
wiring
wiring wiring
5
Pull the continuous wiring out of the next luminaire being mounted and slide the bridge of the luminaire down onto the bridge of the
already installed luminaire so that the tabs and slots at top and bottom nest into one another. The bridges will engage with a load click
when fully mated.
6
Connect the power and control connectors of the
through wiring harness. Connect AC Circuit #1
(black, white and green harness) from first fixture to
AC Circuit #1 from second fixture. Connect AC Circuit
# 2 (brown and brown/white stripe harness) from
first fixture to AC Circuit #2 from second fixture and
connect second circuit supply lines of starter unit.
Dimming
Dimming
connec�ons
connec�ons
Align tabs Align tabs
Align tabs
withslots withslots withslots
Brown
Brown/white stripe
Second circuitwires
Second circuitwires
Brown, Brown/white stripe wires
Brown, Brown/white stripe wires
4
2nd circuit connection: Install listed electrical fittings
in the second knockout holes for wire protection
and pass supply conduit through electrical fittings.
The second circuit wires (line and neutral) will be
connected to the second luminaire in the continuous
run. Leave them unconnected to the brown and
brown/white stripe wires for now.
Wiring Diagrams
DALI
Fixture
Black
Line
Circuit
#1
White
Neutral
Line
Brown
Circuit
#2
Neutral Brown/white
Green
Ground
DALI
Violet/White
DALI
Violet
9
Installation Guide
First circuitwires
First circuitwires
Push down Push down
Push down
to engage to engage
to engage
0-10V
Fixture
Line Black
Circuit
#1
White
Neutral
Line
Brown
Circuit
#2
Neutral Brown/white
Green
Ground
0-10V Violet
0-10V Grey(18AWG)