Lumiscope 6700 Manual De Usuario página 11

With the Optional Rechargeable Battery
One can also use the optional Ni-MH
rechargeable battery for the power input.
It provides approximately 80 minutes of
operation.
To install the battery: Match the device bottom
to the battery top as shown at near right. Slide
until you hear it click into place.
To remove the battery: Push down on the
battery lock as shown at far right and slide the
battery out from beneath the device.
Battery Installation Battery Removal
To recharge the battery: Insert the AC/DC
adapter into the device's power socket. An
orange light indicates the battery is being
recharged. The orange light will de-illuminate
when charging is complete. The minimum
recharge time is 5~6 hours.
Info: The first charge of a new rechargeable battery
will require at least 8 hours.
Battery Recharging
6700-INS-LAB-RevC14 11..