Carlisle BINKS 83C-210-CE Manual De Usuario página 2

EN
This manual contains information that is important for you to know and understand. This information relates to USER SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following symbols. Please pay
particular attention to these sections
Important information that tells how to
prevent damage to equipment, or how to
avoid a situation that may cause minor
injury.
Important safety information - A hazard
The following hazards may occur during the normal use of this equipment. Please read the following chart.
HAZARD
FIRE
FIRE - PRESSURE TANK
INHALING TOXIC
SUBSTANCES
EXPLOSION, PRESSURE
TANK—RUPTURE
GENERAL SAFETY
© ITW Finishing Systems & Products 2009
www.carlisleft.com
SAFETY PRECAUTIONS
that may cause serious injury or loss of
life.
CAUSE
Solvents and coatings can be highly
combustible, especially when sprayed.
Vapours from flammable liquids can catch
fire or explode
Certain materials may be harmful if
inhaled, or there is contact with the skin.
Making any changes or modification to
the pressure tank may weaken it.
Improper operation or maintenance may
create a hazard.
Page 2
2 / 6
NOTE
Information that you should pay special
attention to.
SAFEGUARDS
1. Adequate exhaust must be provided
to keep the air free of accumulations
of flammable vapours
2. Smoking must never be allowed in
the spray area.
3. Fire extinguishing equipment must be
present in the spray area.
1. Keep tank at least 3 metres away
from sources of ignition, including hot
surfaces, mechanical sparks and
arcing (non-explosion proof) electrical
equipment.
1. Follow the requirements of the
Material Safety Data Sheet supplier
by the coating manufacturer.
2. Adequate exhaust must be provided
to keep the air free of accumulations
of toxic materials.
3. Use a mask or respirator wherever
there is a risk of inhaling sprayed
materials. The mask must be suitable
for the material being sprayed.
1. Never drill into, weld or modify the
tank in any way.
2. Do not adjust, remove or tamper with
the safety valve.
3. Only replace the safety valve with the
correct spare part as listed.
4. Do not fit any other safety valve of a
higher pressure rating than the
maximum working pressure of the
tank.
Operators should be given adequate
training in the safe use and maintenance
of this equipment. Refer to Pressure
Systems Safety Regulations 2000
Approved Code of Practice
SB-E-21-041-R1 (2/2018)