Toyotomi Zibro LC-400 Instrucciones De Uso página 10

I
THE CORRECT USE OF 'SAVE'
The 'SAVE' function allows you to limit the temperature. When this function is
activated, the heater will automatically switch off, when the room temperature
exceeds the set temperature by 3°C. Subsequently, when the room temperature
has dropped again to the set temperature, the heater will automatically switch on
again.
Activate the 'SAVE' setting by pressing the appropriate  key.
the information display (Fig. I). Switch off the function by pressing the SAVE key
once again.
Without the 'SAVE' setting your heater will maintain the set temperature by
!
approximation as well, by adjusting its heating capacity. 'SAVE' is an economy
setting, which you can use when, for instance, you are not present in the room or
to keep it frost-free.
J
THE 'FUEL' INDICATOR
When the FUEL indicator appears, it means that there is only fuel left for 10
more minutes. The count-down of the remaining heating time can be seen in the
information display  (Fig. J). Now you have two options:
 You remove the fuel tank and refill it outside the living room (section B) or
 You push the button extension . By pushing this button, the remaining
heating time will extend to 90 minutes.
The heater will automatically switch back to its lowest position. In the display
the number 90 will appear, which will decline to 10. At the arrival of 10,
you will hear an alarm signal every two minutes, warning you to refill the
removable tank. If you do not react, the heater will extinguish by itself. The
heater will also sound a warning signal, when it switches off. The fuel
indicator will blink, while four lines (--:--) are blinking in the information
display. You can stop this by pressing the
Once the heater has used up all its fuel and extinguished, it will take some time,
after the refill, before the heater is completely ready for use again.
K
THE 'VENT' INDICATOR
When there is insufficient ventilation in the room, an intermittent buzzer will
be heard (approximately once each 30 seconds) and the VENT indicator
be blinking. When this signal is given, ensure that the ventilation of the room
is improved (e.g. by opening a door or window a little more), to avoid that the
heater shuts off. When the ventilation of the room is improved, the VENT indicator
and buzzer will be deactivated. When there is still insufficient ventilation, the
heater shuts off automatically. When this occurs, e -1 1 is displayed and the
indicator is blinking and VENT indicator (
ventilation of the room (e.g. by opening a door or window a little more), the
heater can be ignited by pushing
button  once more.
) is lit (Fig. K). After improving the
 again
will display on I: When the SAVE
function is activated, the
heater will automatically
switch on or off in
order to remain within
a specified temperature
J: When the FUEL
indicator has appeard,
the information display
will show the number of
minutes of fuel left in
will
K: A blinking
indicator light is a sign
that you need extra
range.
the tank.
ventilation.
4
9