Plantronics Clarity CLS-45i Instrucciones De Operación página 10

Telefono inalambrico amplificado dual con speaker con identificador de llamadas e identificador de llamadas en espera
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features – Handset
into memory locations.
SPEAKER button. Pressing this button
turns the handset speaker On and Off. It
can also be used to answer incoming calls.
For best results, after turning this function
On and the handset is out of the cradle,
place the handset face down or on its side
so that the speaker grille is not blocked.
AMPLIFY button. This button turns
the extra amplification On and Off. Press
it to put the handset amplifer into the On
mode for maximum volume boost. In the
On position, the button is backlit and the
maximum amplification is 40dB.When it is
Off, the backlight goes out and the maxi-
mum amplification is approximately 18dB.
CHANNEL / SETUP button.
a. This button is used for switching
channels when there is interference on
the line.There are 40 channels. If there
is interference on the line, pressing
this button will move to another chan-
nel which should bring much improved
clarity of reception.
b. Pressing CHANNEL for three (3) seconds
will initiate the SETUP mode.You will see
this indicated on the LCD display.
Handset Controls,
Functions and Features
There are controls on either side of the
handset and they are listed below.
Left Side:
RINGER OFF/ON. This switch turns
the handset ringer On and Off.
REMOTE jack. This 3.5 mm jack is for
use with optional remote devices such as an
Ameriphone ER Pillow Switch or Air Switch.
VOL slide switch. When AMPLIFY on
the handset is Off, this volume control pro-
vides amplification from 0 to 18dB. When
AMPLIFY is On, the volume control allows
you to adjust the amplification up to 40dB.
Right Side:
TONE LO HI. Adjusts the tone to help
you better understand incoming voice on
the handset.The TONE control provides
clarity, especially with similar sounding
words. It is only functional when AMPLIFY
is on.
AUDIO jack. 3.5mm jack used for
connecting other assistive listening devices
such as neckloop, cochlear implant or
Personal Computer speaker.
Handset
Left Side
switch
VOL slide
DETACHABLE
BELT CLIP
jack
REMOTE
RINGER ON/
switch
OFF
6

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido