Description Of The Appliance; Assembly - Kärcher VC 1 Manual Del Usuario

Only connect the device to an electrical
connection which has been set up by a
qualified electrician as per IEC 60364-1.
The screw connections of all connection
hoses must be leak-tight.
CAUTION
Have repair work and work on electrical
components carried out by the authorised
customer service only.
ATTENTION
Do not use scouring agents, glass or multi-
purpose cleaner for cleaning.
Other risks
DANGER
Operation in explosive atmospheres is pro-
hibited.
Risk of explosion
 Never use the device to vacuum up
combustible gases, liquids or dusts.
 Never use the device to vacuum up re-
active metal dusts (e.g. aluminium, mag-
nesium, zinc).
 Never use the device to vacuum up un-
diluted brine or acids.
 Never use the device to vacuum up any
burning or smouldering objects/matter.
These substances can corrode the materi-
als in use on the device.
WARNING
Risk of injury. Do not use the nozzle and
suction pipe at head height.
CAUTION
In order to prevent accidents or injuries,
you must observe the weight of the device
when transporting it.
Accidents or damage due to the device fall-
ing over. Before all actions with or on the
device, you must make sure that it is stable.
HEPA filter
ATTENTION
Material damage may result from incorrect
cleaning of the HEPA filter.
 When necessary, clean the HEPA filter
under running water only. Do not wipe
the HEPA filter or brush the HEPA filter
off.
 Never clean the HEPA filter in the wash-
ing machine.
 Never dry the HEPA filter using a hair
dryer.
 Never clean the HEPA filter using deter-
gents or boiling water.
 Allow the HEPA filter to dry completely
before installing it in the appliance (at
least 24 hours).
Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own
protection.
Never modify or bypass safety devices.

Description of the appliance

Illustrations on fold-out page.
ON/OFF button
1
Suction power regulator
2
Dust full indicator
3
Take-up cable button
4
Carrying handle
5
Running wheels
6
Fixed frame part
7
Switch lever
8
Floor nozzle
9
Parquet floor nozzle
10
Crevice nozzle
11
Telescopic suction pipe
12
Length regulator slide
13
False air slide
14
Handle
15
Suction hose
16
Suction hose hub
17
Filter bag
18
HEPA filter
19
1. Insert the suction hose into the suction
interface, and turn the suction hose hub
clockwise until fixed.
Illustration C
For removal, turn the suction hose hub
anti-clockwise, and unplug the suction
hose hub.
Illustration D
2. Connect the suction tube to the handle.
Illustration E
English

Assembly

19