Treetech GMM-MMI Guía Rápida página 30

Módulo de Interfaz – Monitor de Gas y Humedad
Configurable (attach explanation)
Default Static Object_____________
Default Static Variation __________
Default Event Object_____________
Default Event Variation __________
Point-by-point list attached
Default Counter Object/Variation:
No Counters reported
Configurable (attach explanation)
Default Static Object____________
Default Static Variation__________
Default Event Object____________
Default Event Variation _________
Point-by-point list attached
Default Frozen Counter Object/Variation:
No Frozen Counters reported
Configurable (attach explanation)
Default Static Object____________
Default Static Variation__________
Default Event Object____________
Default Event Variation __________
Point-by-point list attached
Analog Deadbands:
Fixed
Configurable: ____
Per Point
Per Analog Type
Global
Are the updated deadband values preserved through a device reset:
YES
NO
The number of multiple objects allowed in a single read request message:
Number of multiple objects allowed: 3
Ability to DISABLE/ENABLE DNP database points:
Not Applicable
Per point
Guía Rápida – GMM-MMI | GR - 016| 20/06/2016 | Revisión: 1.00
Configurable (attach explanation)
Default Static Object______________
Default Static Variation ___________
Default Event Object______________
Default Event Variation ___________
Point-by-point list attached
Counters Roll Over at:
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value _________
Point-by-point list attached
Counters frozen by means of:
No Frozen Counters reported
Remote device time based
Fixed time
Configurable; range _____ to _____
Master Request (see implementation table)
Both
Configuring Analog Deadbands:
Not Applicable
Configuration Software
Using Object 34 from the master station
Both configuration software and Object 34
IIN 1-6 Device Trouble Bit:
Never used
Reason for setting:
30