Treetech GMM-MMI Guía Rápida página 32

Módulo de Interfaz – Monitor de Gas y Humedad
Sends/Executes Analog Control Operations:
SELECT/OPERATE*
DIRECT OPERATE*
DIRECT OPERATE – NO ACK*
*Attach explanation if 'Sometimes' or 'Configurable' was checked for any operation.
*To support control operations and conform to the Subset Definitions, either 'Always' or 'Configurable' must be
selected.
Queue
Clear Queue
The maximum number of objects supported in a single control request for objects 12 and 41.
Number of objects allowed for object 12: 1
Number of objects allowed for object 41: 1
Control Points per address:
Configurable
1 control point per address
2 control points per address
Maximum Select/Execute Delay Time:
Not Applicable
Fixed at _____ seconds
Configurable, range ______ to ______ seconds
Sends Unsolicited Responses:
Never
Configurable (attach explanation)
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE Unsolicited:
Not Supported
Configurable
Function codes 20,21 supported
Assign Class Function code supported:
NO
YES
Per Object
Per Point
Configurable
Guía Rápida – GMM-MMI | GR - 016| 20/06/2016 | Revisión: 1.00
Never Always Sometimes
Never Always Sometimes
Never Always Sometimes
Never Always Sometimes
Never Always Sometimes
Do all indices support the same control codes:
YES – Controls codes 3 and 4
NO – attached points list stating configuration ability
and supported control codes per point or group of points
Ability for REMOTE/LOCAL control mode:
Not Applicable
Per point
Per object
Global
Sends Static Data in Unsolicited Responses:
Never
When Device Restarts
When Status Flags Change
*No other options permitted.
Minimum number of events and/or minimum time
before transmission of an unsolicited message.
# of events:__________
min. amount of time(msec) :___________
Is the Event Buffer size configurable:
NO fixed size: _______
YES: range: _________to_________
Configurable Per Class buffer:
NO
Configurable
Configurable
Configurable
Configurable
Configurable
YES
32