Tripp-Lite SNMPWEBCARD Manual De Instalación página 4

Installation
3 - Static IP Address Assignment
3-1
Determine IP Information: Before assigning a static IP address, you'll need to know
the IP address, gateway address and subnet mask. If you do not have this
information, contact your network administrator for assistance.
3-2
Configure Terminal Emulation Program: Open a
VT100-compatible terminal emulation program
(such as the HyperTerminal program bundled with
®
Microsoft Windows
available DB9 serial port. (A notebook computer
may be the most convenient choice.) Set the
terminal emulation program to use the COM port
that corresponds to the DB9 serial port. Specify
A
the parameters
SNMPWEBCARD terminal interface:
If the terminal emulation program supports multiple emulation modes, you may also
need to specify VT100 emulation
A
®
) on a computer with an
required to communicate with the
B
C
.
B
4
Bits per second:
Data bits:
Parity:
Stop bits:
Flow control:
C
9600
8
None
1
None