Error Codes; Error Description; Replacement Parts And Accessories - Adam WBZ Serie Manual De Instrucciones

EN

14.0 ERROR CODES

During the initial power-on testing or during operation, the scale may show an
error message. If an error message is shown, repeat the step that caused
the message. If the error is still shown contact your supplier for support.
ERROR DESCRIPTION
Initial Zero is greater than
Err 4
allowed when power is turned
on or the Zero key is pressed.
Err 6 A/D count is not correct when
turning the scale on.

15.0 REPLACEMENT PARTS AND ACCESSORIES

If you need to order any spare parts and accessories, contact your supplier or
Adam Equipment. A partial list of such items is as follows-
• Power Supply Module
• Replacement Battery
© Adam Equipment Company 2011
POSSIBLE CAUSES
Weight is on the pan when
turning the scale on.
Excessive weight on the pan
when zeroing scale.
Improper calibration of the scale.
Damaged load cell.
Damaged Electronics.
Platform is not installed.
Load cell is damaged.
Electronics is damaged.
• Stainless Steel Pan
• In use cover
15