H+H babyruf MBF 1213 plus Manual De Instrucciones página 15

Connecting the Receiver Unit
Connect the power adapter lead from the power adapter socket [1] on the receiver unit to
a properly installed mains power outlet.
Charging the Batteries
Connect power adapter plug with the power adapter plug adapter socket [1] to a properly
installed electric mains socket.
The batteries must be charged for at least 2 hours before being used for the first time.
Switching the Receiver Unit On/Off
The receiver unit is automatically switched on as soon as the receiver unit is connected to a
properly installed electric socket.
Push button 8.
Operating and Charge Indicator on the Receiver Unit
The LED [3] lights up.
The LED [4] is flashing.
The LED [3] is flashing.
Putting the Transmitter Unit into Operation
The transmitter unit is operated from a power supply via the power adapter socket [10]. Place
the unit at approx. 1 m distance from the bed of the child or of the person to be monitored
and route the power supply cable so that no one can trip over it.
Connecting the Transmitter Unit
Connect the power adapter lead from the power adapter socket [10] on the transmitter
unit to a properly installed mains power outlet.
automatically.
The LED [4] will flash.
The receiver unit will switch off.
The receiver unit is switched on.
The batteries are being charged.
The receiver/transmitter unit is located outside the range.
The receiver unit will switch on automatically.
The transmitter unit will switch on