Olympia HomePlug 8500E Manual De Instrucciones página 34

4. A confirmation box appears when the password is entered correctly.
NOTE: If the device is not found, a corresponding message appears and
suggestions on solving the problems are provided.
Adding Devices to the Network
You can add further HomePlugs, not currently displayed in the list, to your network.
This could involve HomePlugs, for example, which are currently in another logical
network.
NOTE: We advise users to enter passwords for all the HomePlugs they wish to
manage and to add the HomePlugs to the local logical network.
1. Click on the [Add] button.
2. A dialog box opens (refer to Fig. 11).
Fig. 11 Adding a device to the network
3. Enter the device name in the Device Name input field and the password relevant
to the HomePlug in the Password field.
4. Click on the [OK] button.
5. A confirmation box appears when the password is entered correctly.
NOTE: If the device is not found, a corresponding message appears and
suggestions on solving the problems are provided.
Scanning the Network for HomePlugs
Use the [Scan] button to make an immediate search for HomePlugs which should be
connected in the network. By default, the network is scanned every few seconds and
the entries are updated in the Main screen.
Page 14 of 20
Operating Instructions
Homeplug 8500E Turbo Ethernet Adapter
Edition 06, August 2007