Head And Shoulder Support Adjustment; Adjustment Of The Leg Extension; Adjustment Of The Lie-Flat Position (Only Gr. I, 9-18 Kg) - Kiddy Guardianfix 3 Manual De Instrucciones

EN

4.2 Head and shoulder support adjustment

The correct head support setting is reached when the child's temples are within
the narrowest part of the head support (G).
To adjust the head (G) and shoulder supports (H), actuate the height adjustment
handle (P) on the back side of the head support (G) by gently pulling it outwards
and then sliding the head support (G) up or down depending on the desired
height (Fig. 6).
Ensure that it has correctly engaged by gently pressing down on the head
support (G).

4.3 Adjustment of the leg extension

You can provide significantly better seating comfort for your child by adjusting
the leg extension (K).
To adjust the leg extension (K), reach into the recessed grip under the leg extension
and pull or slide the leg extension to the desired position (Fig. 7).
4.4 Adjustment of the lie-flat position (only GR. I, 9–18kg)
Never adjust the lie-flat or sitting position during travel. For this purpose, stop
your vehicle, open the vehicle's belt, and remove your child.
The lie-flat position may only be used for children of Group I
!
(9–18 kg) in combination with the impact shield and with semi-
universal fastening with the k-fix + connectors.
In order to adjust the lie-flat position, actuate the unlocking handle (R) (Fig. 8,
No. 1) while simultaneously pulling the seat (I) away from the vehicle back rest
(Fig. 8, No. 2). The further you pull the seat forward (I), the greater the angle of
the lying position.
24