Removing The Seat Cover; Removing The Cover Of The Leg Extension; Impact Shield Cover; Applying The Cover - Kiddy Guardianfix 3 Manual De Instrucciones

EN
Finally, open the hook and loop fasteners on the back of the shoulder support
cover and remove the cover from the shoulder supports (H).

10.2 Removing the seat cover

First open the press studs on the underside and back side of the seat (I) and the
front of the back rest (C).
Now disengage the left and right hook and loop fasteners under the cover and
pull the cover up and off.

10.3 Removing the cover of the leg extension

First pull the leg extension (J) into the most forward position.
Then detach the cover from the hook on the underside of the leg extension (J).
Now carefully pull the cover over the edge of the leg extension (J) in an upwards
motion.

10.4 Impact shield cover

The impact shield cover may not be removed or washed.
!
In case of damage to the impact shield (L) or its cover, contact your responsible
dealer or the manufacturer.
10.5 Applying cover
To apply the cover, proceed in reverse order for the removal of the cover (10.1-10.3).
32