Tools Needed - Robern SCULPT Chamfer Manual Del Usuario

DIMMER RECOMMENDATIONS

Robern recommends the Maestro® C•L® Dimmer from LUTRON®, Model # MACL-153M.

http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf

Other LED control dimmers may operate with this product but have not been tested or verified. It's recommended that the dimmer be

within reach of your mirror so you can adjust the brightness.

For on/off (no dimmer) operation a standard wall switch may be substituted in place of the dimmer.

TOOLS NEEDED

1/4" 3/32"

PARTS

[216-1166]*

Mounting Hardware Bag

(5) Wall Anchor

(2) Screw

Mirror

Frame

(5) Screw

(2) Cleat

(1) Wall Bracket

(2) 1" Loop

(2) 5" Loop

(2) 3" Locking

Adhesive Strip

Reflector

†

* Some hardware may not be used in all installations.

For framed mirror sizes over 45" in width, two hardware bags are included.

Title 24 models only

†

Part no. 209-1308-rC rev. 08/29/19

Sculpt

800.877.2376

www.robern.com

Installation instructions

Tabla de Contenido

Sculpt slim