Salvador Escoda MUCSW-16-HG Manual De Instalación Y Funcionamiento página 34

successfully. Press
TI M ER
3. Press
the required day of week. Master unit will then retrieve the setting from the selected slave unit and
timer display area will show 'rEAd'. The off timer setting will be shown upon reading the data
successfully. Press
4. Upon completion of changing timer settings of the selected day, press
timer programming mode. The settings will then update to the selected slave unit. The next day of the
week settings can be done only upon completion of sending data to the salve unit. (Repeat steps 1~4
if setting is required for the next day of week).
5. In Global control mode:
Pressing master
Timer settings will broadcast to all slave units.
Clock synchronization by master unit is as follow:
TI M E
1. Press
2. Master wall pad responses with a beeping sound.
4) Key lock
In order to prevent unauthorized access to the system setting, a key lock function is provided to prevent mischief.
Hold down
lock. Only button is applicable in key lock mode.
5) Swing
Press to activate or deactivate swing function.
6) Sleep
SLEEP
Press button to activate or deactivate sleep setting. Sleep is valid in cool or heat mode only.
7) Temperature setting
Press or
temperature. Press the above button to adjust the set temperature.
8) Mode setting
M ODE
Press button to change the operation mode.
TI M E
TI M E
or
button again to enter into off timer programming mode. Press
TI M E
TI M E
or
C AN C EL
button for 3sec will cancel all the timer settings in all slave units.
TI M E
and buttons for 3sec to activate clock synchronization to all salve units.
and for 3 sec to activate key lock,
to enter into temperature setting mode, temperature display area blinks the current set
button to change the on timer setting.
button to change the off timer setting.
symbol lights up. Repeat the same to exit key
10
button to select
TI M ER
button again to exit