Publicidad
– Blue (solid): Indicator turns solid blue shortly after
Bluetooth pairing is successful.
– Red (solid): Indicator turns solid red shortly when Bluetooth
pairing fails.
K On/Standby
Short press this button to switch BeoPlay A6 between
playback mode and standby mode. Long press this button to
activate the All Standby feature, which turns all devices on
your network to standby mode.
L Power on/standby
Press this button to switch on BeoPlay A6 and switch
between play and pause mode.
M Product indicator
– Off: Product is in standby mode or switched off.
– White (flashing): Product is starting up.
– White (single flash): Product receives a remote control
command.
– Red (solid): Indicator turns solid red shortly during factory
reset.
– Red (flashing): When this indicator is flashing red and the
network indicator is flashing red at the same time, it indicates
software update is in progress. Do not operate the product or
switch it off.
– Red (flashing): Firmware error. Disconnect the product from
the mains supply and then reconnect it.
– Orange (flashing): Indicator is flashing orange when the
product is overheating and needs time to cool down.
28
Publicidad
