Hardware Overview; Rear Panel; Front Panel - D-Link ShareCenter Pro 1200 Guía De Instalación Rápida

2. Hardware Overview

Gigabit Ethernet Port
Use the Gigabit Ethernet Port to
connect the ShareCenter to the
local network.
Power Receptacle
Connect the supplied power
cord to the receptacle.
OLED Screen
This screen displays detailed
information about the following:
System Information, HD Volume
Information and Error Messages
D-Link DNS-1200-05 Quick Installation Guide

Rear Panel

Reset Button
Press this button for more than 5 seconds to reset
the unit to factory defaults.

Front Panel

Front Panel Lock
Turn key to up
position to unlock.
Turn key to left
position to lock.
Next Button
Use this button to display
the System Information,
HD Volume Information,
and Error Messages on
the OLED.
Press the button once
to alternate between the
different Status screens.
Hardware Overview
Cooling Fan
The cooling fan is used to cool the
hard drives and feature speed control.
When the unit is first powered on the
fans rotate at a low speed and rotate
at a high speed when the temperature
rises above 49 °C.
USB Connector
Two USB 2.0 (Type A) connectors. The
USB Host ports are for Print Servers,
USB memory disks or USB UPS
monitoring.
Drive Trays
Use the screws to fasten
the SATA hard drives
with the trays and insert
to the ShareCenter.
Power Button
Use this button to switch the device
on or off.
To switch on the device press the
button once.
To switch off the device hold the
button down for 5 seconds.
3