Configuration - D-Link ShareCenter Pro 1200 Guía De Instalación Rápida

4. Configuration with Wizard
When first powered on, during the initial boot sequence, the ShareCenter will wait
to be assigned an IP address via DHCP. If it does not receive a DHCP assigned IP
address, by default it will have a self-assigned IP address in the range of 169.254.0.0
to 169.254.255.255. It is recommended to use the included D-Link Easy Search Utility
when accessing and configuring the ShareCenter for the first time. If you want to
change the IP address before logging in or are unable to connect to the ShareCenter IP
address, you can use the Easy Search Utility provided on the product CD to locate the
device on your network and make any needed changes.
Network Storage
The Easy Search Utility
Device displays any ShareCenter
devices it detects on the
network here.
Refresh Click Refresh to refresh the
device list.

Configuration

Click Configuration to access
the Web based configuration
of the ShareCenter.
LAN Configure the LAN Settings
for the ShareCenter here.
Apply Click Apply to save changes
to the LAN Settings.
iSCSI Drive Displays the available iSCSI
Mapping targets on ShareCenter.
Connect Click Connect to connect to
the iSCSI target.
Management Click Management to edit the
information.
Drive Mapping Volumes available for mapping are displayed here.
Available Drive Choose an available drive letter. Click Connect to map the selected volume.
Letters Click Disconnect to disconnect the selected mapped volume.
About Click About to view the software version of the Easy Search Utility.
Exit Click Exit to close the utility.
D-Link DNS-1200-05 Quick Installation Guide
Easy Search Utility
Configuration with Wizard
7