Sms Dialer (Bgsm-120 Series Only); Voice Dialer (Bgsm-120 Series Only) - Bentel Security BGSM-120 Serie Manual De Usuario

SMS dialer (BGSM-120 series only)

In SMS dialer operating mode, one or more telephone numbers (the first 8 entries in the phonebook) are sent SMS messages
(as programmed previously) corresponding to the following events (see table below):
No.
1
2
3
4
5
6
7
8
9
10
11
  Event disabled on telephone number
  Event enabled on telephone number
* The SMS string may be up to 100 characters long
 Alarm indications which may occur on one or more of the 3 programmable input lines. Bear in mind that 2 SMS messages
can be programmed for each of the 3 input lines on the device, one for Activation and one for Resetting.
 PSTN line test. 2 SMS messages may be programmed: one for PSTN line absence and one for Resetting.
 Power supply voltage test. 2 SMS messages may be programmed: one indicating Power supply voltage problems and
one for Resetting.
 Periodic SMS message, with a programmable time period between 1 hour and 1 year.
 An SMS message is transmitted when one of the above events occurs, for which an SMS message and at least
one telephone number has been programmed.

Voice dialer (BGSM-120 series only)

During operation in Voice dialer mode, one or more telephone numbers (the first 8 entries in the phonebook) are sent a pre-
recorded voice message. Up to 8 messages may be recorded, each with a maximum duration of 16 seconds. Each
message is recorded onto a solid state memory, thereby eliminating all problems linked to the use of magnetic tape, such as
the deterioration of message quality over time; the jamming of mechanical systems after extended periods of inactivity, etc...
The messages are linked to the following events (see table below):
No. Event description
1 Input 1 Event
2 Input 1 Restore
3 Input 2 Event
4 Input 2 Restore
5 Input 3 Event
6 Input 3 Restore
7 PSTN Fault Event
8 PSTN Fault Restore
9 Mains Fault Event
10 Mains Fault Restore
11 Periodic Call
  Event disabled on telephone number
  Event enabled on telephone number
12
Event description
Input 1 Event
Input 1 Restore
Input 2 Event
Input 2 Restore
Input 3 Event
Input 3 Restore
PSTN Fault Event
PSTN Fault Restore
Mains Fault Event
Mains Fault Restore
Periodic SMS
Programmed telephone numbers
(first 8 entries in the phonebook)
1 2 3 4
   
   
   
   
   
   
   
   
   
   
   
Programmed telephone numbers
(first 8 entries in the phonebook))
1 2 3 4 5
    
    
    
    
    
    
    
    
    
    
    
SMS message
5 6 7 8
   
*SMS string
   
*SMS string
   
*SMS string
   
*SMS string
   
*SMS string
   
*SMS string
   
   
*SMS string
   
   
*SMS string
   
*SMS string
Mess. #1 Mess. #2 Mess. #3
6 7 8
  
Voice
  
Message 1
  
Voice
  
Message 2
  
  
  
  
  
  
  
GSM/GPRS Alarm Communicators
Voice
Message 2