Message indication (voice mail box)
This applies only to subscribers with access to a voice mail service.
The telephone has a function that facilitates dialling/listening to this service.
In addition, if you subscribe to services for message indication and caller ID the display
will show if some one has left a message.
A new message is indicated then with the text Mailbox on standby (only applies in
certain countries).
Please note!
The telephone number to call voice mail depends on the network and must be programmed see Service
codes under
Changing settings in the base menu
Playback with hot key
1. Hold
pressed down for a few seconds.
1
2. Listen to the information/messages received.
3. Press
to terminate the call.
L
Other services
Most usual operator/extra services can be accessed via the menu
Please note!
The functions available will depend on your service provider.
You may have to pay extra for some services, contact your service provider for more information.
Some services will not work unless you have contacted your service provider to activate them.
Using the Flash button manually
1. Connect an external call and wait until the timer is shown. Press R.
2. Enter telephone number or manual code. Press
Busy number/call waiting
1. Connect an external call and wait until the timer is shown. Press
2. Scroll to required service. Press
Call internal (see Expanded System).
-
-
CW accept Answer incoming call waiting (=R
CW reject Refuse incoming call waiting and send engaged tone (=R
-
Auto Redial When a number is engaged. When the number is free you will hear a
-
quick ring signal (=
Under inquiry/alternating/answered call waiting
Use the respective menu button:
-
Brokering Switching between two calls (=R
Conference Conference/three party call (=R
-
English
.
W
).
5
further on in this chapter.
.
W
).
2
).
2
).
3
during a call.
W
.
W
).
0