TEKONSHA 3064-P Instrucciones De Instalación

Installation Instructions
Directives de Montage
Instrucciones de Instalación
Electric Trailer Brake Control Wiring Adapter
Adaptateur pour câblage de commande
de frein de remorque électrique
Adaptador del cableado de control eléctrico
del remolque
Chevrolet Silverado
WARNING
ALWAYS read and follow all warnings and
instructions included with purchase before
beginning installation. Keep for future reference.
DO NOT exceed lower of towing manufacturing
rating (including in your vehicle owner's manual)
or specific amperage ratings stated on product.
ALWAYS read, understand and follow all warnings
and instructions printed on tow vehicle's battery.
ALWAYS wear safety glasses and use all safety
precautions during installation.
3064-037 Rev. A
ENGLISH
TOOLS REQUIRED:
None
1. Make sure the vehicle is off with the keys removed
from the ignition.
2. Locate the vehicle's electric brake control harness.
The harness will be located underneath the dash
and left of the steering column, taped to another
harness near the emergency brake pedal. There
will be a 14-pin connector that mates with the one
A
on the adapter .
3. Plug the brake control adapter into the vehicle's
electric brake control harness connector. Follow all
brake control manufacturer's installation instruc-
tions.
4. Locate a routing path for the adapter to exit the
bottom of dash.
WARNING
Complete the installation per the electric brake
control manufacturer's instructions and mount
the unit as directed. Perform test procedures as
instructed.
WARNING
Overloading circuit can cause fires. DO NOT exceed
lower of towing manufacturer rating or:
• Max. 4 AXLES: 8 BRAKES (24 amps)
Read vehicle's owners manual & instruction sheet
for additional information.
A
9/10/2018
5. Vehicle's equipped with factory brake controller
will not have an active Trailer Brake Control Output
present on the factory brake control harness. A
separate Trailer Brake Control Output wire (not
included) will be required to route from the after-
market brake controller (Blue Wire) to the factory
7-Way connector.
PAGE 1 OF 3
B