Checking The Dvd Status; Checking The Audio Cd Status; Using The Dvd Disc Menu And Title Menu; Repeating A Title Or Chapter Or Track - Insignia NS-F20TR Guia Del Usuario

Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo

Checking the DVD status

You can view status information about the
currently playing DVD.
To view the DVD status:
• Press the DISPLAY button once to see the
elapsed and remaining playing time for the
current chapter.
• Press the DISPLAY button again to see the
elapsed and remaining playing time for the
current title.
• Press the DISPLAY button again to see the
current bit-rate and repeat setting. If you are
playing a dual-layered DVD, the layer
number also appears (L0 means layer 0 is
playing. L1 means layer 1 is playing).
• Press the DISPLAY button again to turn off
the status display.

Checking the audio CD status

You can view status information about the
currently playing audio CD.
To view the audio CD status:
• Press the DISPLAY button once to see the
elapsed and remaining playing time for the
current track.
• Press the DISPLAY button again to see the
elapsed and remaining playing time for the
entire CD.
• Press the DISPLAY button again to turn off
the status display.

Using the DVD Disc menu and Title menu

Some DVDs have Disc and Title menus. If the
DVD you are playing has one of these menus,
you can access this menu during playback.
To use a DVD Disc or Title menu:
1 Press the DISC/MENU or TITLE button. If the
DVD has a Disc or Title menu, the menu
opens.
2 Press the or
, , ,
option, then press the ENTER button.
Note
• If the DVD has a Disc menu, audio language,
subtitle options, chapters for the title, and other
options appear on this menu.
• Menu options available on DVDs vary.

Repeating a title or chapter or track

To repeat a DVD title or chapter or an audio
CD track:
1 During playback, press the MODE button one
or more times until REPEAT appears.
2 Press the or button to select a repeat
mode. You can select:
• For DVDs–OFF, CHAPTER, TITLE
• For CDs–OFF, TRACK, ALL
Note
When you change to a different title, chapter, or
track, the repeat function turns off.
3 Press the RETURN button to close the menu.

Creating a playback loop for a DVD or CD

Creating a CD playlist

, button to select an
www.insignia-products.com
To create a playback loop:
1 During playback, press the MODE button one
or more times until A-B REPEAT appears.
2 When the disc reaches the starting point you
want, press the ENTER button. To cancel the
starting point, press the CLEAR button.
3 When the disc reaches the ending point you
want, press the ENTER button. The playback
loop you created starts playing.
4 To cancel the loop, press the MODE button
one or more times until A-B REPEAT
appears on the screen, then press the
ENTER button one or more times until OFF
appears. Press the RETURN button to close
the menu.
Note
• You can only create a playback loop for the
current DVD title or current CD track.
• You cannot create a playback loop with some
scenes in DVDs.
• You cannot create a playback loop if another
repeat function is currently active.
You can create a CD playlist that lets you play
the tracks on a CD in any order.
To create an audio CD playlist:
1 Turn on your TV combo, then insert a CD.
2 If CD starts playing, press the STOP
button.
3 Press the MODE button. The PROGRAM
screen appears.
4 Press the or button to select a track,
then press the ENTER button.
5 Repeat Step 4 to enter additional tracks.
Note
• You can program as many as 99 tracks.
• Press the CLEAR button to erase the last track
you selected.
• If you enter more than 8 tracks, you can press
the SKIP/REW or FWD/SKIP
to scroll through the playlist.
• To erase all the tracks in the playlist, select ALL
CLEAR at the bottom of the list.
6 Press the PLAY button to play your playlist.
button
23