Insignia NS-F20TR 20" Flat Tube TV/DVD/VCR Combo
Connecting to a cable or satellite TV box
Use the following illustration to connect a cable
converter box or satellite receiver
Cables not included
Satellite
OR
Cable TV
antenna
To connect a cable or satellite TV box:
1 Connect an antenna cable to the cable or
satellite TV signal source, then connect the
other end of the cable to the input jack on the
cable converter box or satellite receiver.
2 Connect an antenna cable to the output jack
on the cable converter box or satellite
receiver, then connect the other end of the
cable to the ANT. jack on the back of your
TV combo.
Connecting a device to the front A/V jacks
Use the following illustration to connect an
external video device, such as a VCR, to the
front A/V jacks using a standard A/V cable.
External device
AUDIO
VIDEO
S-VIDEO
OUT
OUT
OUT
External device A/V jacks
Note
If the external video device uses monaural audio
(only one audio jack), use the AUDIO L jack on
your TV combo.
Connecting a video camera or video game
ANT.
AUDIO OUT
COAXIAL
Back of
A N T .
TV combo
RF cable
Satellite receiver or
cable converter box
IN
OUT
Connecting a digital audio device
Cables not included
TV combo front A/V jacks
www.insignia-products.com
Use the following illustration to connect a video
camera or video game.
Video camera
Cables not included
Video game
TV combo front A/V jacks
External device
A/V jacks
Note
If the external video device uses monaural audio
(only one audio jack), use the AUDIO L jack on
your TV combo.
Use the following illustration to connect a digital
audio device.
MD deck, DAT deck
Cables not included
Back of TV combo
ANT.
Dolby Digital
decoder
Coaxial digital
audio input jack on
external device
AUDIO OUT
COAXIAL
AUDIO OUT
COAXIAL
AUDIO OUT COAXIAL
jack (DVD/DTV AUDIO
OUT)
9