Eyecup Adjustment; Neckstrap Attachment - Bushnell LEGEND E Serie Manual De Instrucciones

9. Your binocular should now be adjusted for your eyes. Focusing for any
distance can now be done simply by turning the center focus knob. Make
a note of your diopter setting (position of the diopter adjustment ring's
index mark) for future reference.

EYECUP ADJUSTMENT

Your Bushnell Legend binocular is fitted with twist-up eyecups designed for
your comfort and to exclude extraneous light. For users without eyeglasses,
twist the eyecups up, rotating the eyecups counter-clockwise until they lock
into the fully "up" position (Fig. 4). If you wear glasses, make sure the eyecups
are in the down position- this will bring your eyes closer to the binocular lens,
allowing you to see the full field of view. To lower the eyecups from the full
"up" position, rotate them clockwise (Fig. 5). The eyecups may also be set to
a position midway between fully up and fully down, which may suit some
individuals better.

NECKSTRAP ATTACHMENT

To attach the neckstrap, thread the ends of the neckstrap through the strap
channel (Fig. 6) on each side of the binocular (start at the bottom of the channel
and push the strap up through the top as shown), then back through the plastic
buckle on the strap (Fig. 7). Adjust the position of the binoculars on your chest
as they hang around your neck to your preference, by changing the length of
the strap section which passes through the strap channel and buckle by an
equal amount on each side.
8
(Fig. 4 and 5)
(Fig. 6 and 7)
Fig. 4 Eyecup in "Up" Position
(for use without eyeglasses)
Fig. 5 Eyecup in "Down" Position
(for use with eyeglasses)