Textron Greenlee IPM-100 Manual De Instrucciones página 2

Description
The Greenlee IPM-100 Industrial Process Control Loop Calibrator is a hand-held testing device
intended to calibrate any standard 4 mA to 20 mA industrial process control loop.
It has the ability to:
• Check, measure, and calibrate all current signal instruments in a 4 mA to 20 mA DC loop.
• Provide a 0.00 mA to 24.0 mA source.
• Simulate a 2-wire transmitter.
• Simultaneously power and measure a 2-wire transmitter.
• Display either current (0 mA to 24 mA) or percent (–25% to 125%).
Safety
Safety is essential in the use and maintenance of Greenlee tools and equipment. This
instruction manual and any markings on the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe all of the safety information provided.
Purpose
This instruction manual is intended to familiarize all personnel with the safe operation and
maintenance procedures for the Greenlee IPM-100 Industrial Process Control Loop Calibrator.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no charge.
Greenlee and are registered trademarks of Greenlee Textron.
KEEP THIS MANUAL
2