Display Icons - Textron Greenlee IPM-100 Manual De Instrucciones

Display Icons

11. LO
12. HI
13. BAT
14. PWR XMTR
15. 2-WIRE
16. -8.8.8.8
Flashing digits Open loop or reversed polarity
17. %
18. mA
19. READ
20. SOURCE
Features
Operating Functions
Switch or Button
SOURCE READ
POWER 2-WIRE
MODE
mA / %
Output Checkpoints
Switch or Button
100% / 20 mA
SET
0% / 4 mA
Low Span Output is selected (0% or 4 mA)
High Span Output is selected (100% or 20 mA)
Low battery
Power Transmitter Function is selected
2-Wire Function is selected
Measurement
Over-range (the signal is too high for the range)
Under-range (the signal is too low for the range)
Percent
Milliamperes
Read Function
is selected
Source Function
is selected
• Select SOURCE/POWER TRANSMITTER.
• Select READ/2-WIRE SIMULATOR.
• Toggle between SOURCE and POWER TRANSMITTER.
• Toggle between READ and 2-WIRE SIMULATOR.
Select a display mode, either current (mA) or percent (%).
Set the output to 100%, or 20 mA.
Set the output to the user-defined set point.
The default setting is 12 mA. To change this, see Settings.
Set the output to 0%, or 4 mA.
13
12
11
20
Use to:
Use to:
14 15
19 18
IPM-100
16
17
7