Specifications - AKG C 3000 Modo De Empleo

5 Specifications

Type:
Polar patterns:
Sensitivity at 1000 Hz:
Frequency range:
Electrical impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation pad:
Equivalent noise level to IEC 60268-4 (A-weighted):
Signal/noise ratio re 1 Pa (A-weighted):
Max. SPL for 0.5% THD (0/-10 dB):
Dynamic range:
Environment:
Power requirement:
Current consumption:
Connector pinout:
Size:
Net weight:
*) Values for 48 V phantom power; reduce by 3 dB for 24 V and 6 dB for 12 V phantom power.
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the
Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com.
Frequency Response Curve
C 3000
1-inch large-diaphragm pressure gradient
microphone
cardioid
20 mV/Pa (-32 dBV)
20 to 20,000 Hz (refer to frequency response curve)
200 ohms
 1000 ohms
6 dB/octave below 500 Hz
-10 dB, switchable
14 dB-A
80 dB*)
200 / 630 Pa ^= 140 / 150 dB SPL*)
126 dB (A-weighted)*)
- temperature: -10°C to +60°C (14°F to 140°F)
- relative humidity: 90% (+20°C/68°F),
85% (+60°C/140°F)
9 to 52 V phantom power to IEC 61938
 2 mA
3-pin male XLR to IEC standard
max. dia.: 53 mm (2.1 in.),
length: 162 mm (6.4 in.)
320 g (14.1 oz.)
Polar Pattern
Specifications
13