Commissioning; Safety Information; Delivery Scope And Transport Inspection; Unpacking - Caso IceMaster Pro Manual Del Usuario

13 Commissioning

This chapter provides you with important safety notices during the initial commissioning of
the device. Observe the following notices to avoid dangers and damages:

13.1 Safety information

Warning
Personal and property damages can occur during commissioning of the device!
Observe the following safety notices to avoid such dangers:
► Packaging materials may not be used for playing. There is a danger of suffocation.

13.2 Delivery scope and transport inspection

As a rule, the IceMaster Pro is delivered with the following components:
 IceMaster Pro
 Ice basket
 Ice scoop
 Operating Instructions
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.3 Unpacking

Unpack your ice maker as follows:
 Take out the ice maker from the box and remove the interior and exterior packaging.
 Remove the tapes for fixing the ice scoop and ice basket.
 Before using your ice maker for the first time, thoroughly clean the water reservoir and
the ice basket as well as the ice shovel (see chapter Cleaning and Maintenance).
 Clean the interior of the machine with water. Open the drain cap on the front bottom
side to drain out the water from the ice maker.
Caso IceMaster Pro 27