Kärcher KM 150/500 R LPG Manual De Instrucciones página 15

 Unscrew the wing nut from the centrifu-
gal separator.
 Clean the centrifugal separator.
Changing the headlight bulb (option)
 Unscrew the head lamps.
 Take out the head lamps and pull out
the plug.
Note: Note the positions of the plugs.
 Dismantle the head lamps.
 Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.
 Unlock the bracked and take out the
bulb.
 Insert new bulb.
 Reinstall in reverse sequence.
Changing the blinker bulb (option)
Note: Remove the glass of the direction-in-
dicator lamp from its casing to replace the
bulb.
Replacing fuses
 Open the fuse holder.
 Check the fuses.
Note: The fuses FU 01 and FU 14 are lo-
cated in the motor compartment.
FU 01 Main fuse
FU 02 Gas cylinder fill level indi-
cator
FU 03 Safety relay
Multifunction display
FU 04 Travel direction forward/re-
verse
FU 05 Motor electrics
FU 06 Ventilator motor hydraulic
cooler
FU 07 Program selection switch
Waste container functions
FU 08 Starter relay
FU 09 Display instrument
FU 10 Position lamps
FU 11 Front work lights (low
beam)
FU 12 Vibrator system
Beacon lamp
Horn
FU 13 Water pump
Capacitor ventilator
Cabin lighting
Wiper
3. Side brushes
Blower motor cabin
FU 14 Fanmotor capacitor
 Replace defective fuses.
Note: Only use fuses with identical safety
ratings.
60 A
5 A
10 A
10 A
5 A
25 A
EN
10 A
30 A
7,5 A
7,5 A
10 A
20 A
15 A
40 A
13
-
15