Description Of The Device - Erreka APB 11000 Manual Del Usuario

APB11000.book Page 6 Wednesday, June 4, 2008 4:17 PM
APB
11000
BASIC CONTROL PANEL
English
1

DESCRIPTION OF THE DEVICE

Warnings
The APB11000 probase module is designed to carry out
the following functions:
• radio receiver for remote control (connecting to
a standard radio card), providing a tension-free relay
output
• timer for automatic closing (connecting a timer
card) in those operation panels which do not have
this mode
Controls and indicators
DL1 ON Power supply
DL2 RL1 (relay activated)
Connectors
ANT Reception antenna connector
Fig. 1 Parts of the device
6
Installation instructions
BASE MODULE FOR RADIO AND TIMER

Install the base module only to carry out the
functions described in these instructions.
Inappropriate use may lead to failures and
hazardous situations.
Components
CM Control panel or electrical/electronic device to
command
FCA Opening end of travel (normally open). The
timer starts when this closes. If it opens, the
timer halts.
M.D. Reception card for remote-control
TEMP.Timer card (HTC card)