NeuLog WIFI-201 Manual Del Usuario página 20

20
Home
U (USB module): (yellow LED) The yellow LED will remain
lit when the WIFI module is working in USB mode
(detailed below). USB mode can be turned on and off by
pressing the button on the front of the WIFI module three
times.
Materials required
 Battery module or USB to micro USB cord (as a power
source).
 Any NeuLog sensor.
 NeuLog WIFI module.
 Any device with wireless capabilities.
Control and view modes
When multiple users are connected to the WIFI module's
network; one user at a time can enter "control mode" the
others users will be defaulted to "view mode".
Control mode:
Entering control mode allows that user to manipulate the
experimental parameters and begin data collection
using the web application – this prevents multiple users
from all trying to change the experiment at once.
To leave control mode, simply click the "Tools" icon and
then the "Release master" button.
View mode:
In view mode; users have almost full access to the web
application – only lacking the ability to manipulate data
and start/stop experiments. Users in view mode have
the full ability to view data in real time.
V2018.01 English