NeuLog WIFI-201 Manual Del Usuario página 24

Note:
During this time the green light on the WIFI module
will flash. In the event that the NeuLog site could not
be accessed the blue light will turn back on and the
WIFI module will return to "Access point mode".
5. If connection to the NeuLog site is successful; you will
be disconnected from the NeuLog closed wireless
network (i.e. NeuLog1334) and the green light on the
WIFI module will remain on.
6. At this point you must connect to your local wireless
connection (the information you put into the "Client
Mode" boxes).
7. On the new screen you get, click the Connect button
to reconnect the browser to the WIFI-201 module.
8. You will now be in client mode with the ability to
browse the internet using your smart device.
When connecting additional wireless devices (up to 5
total) simply type the address "Wifi201.com" into your
device's internet browser bar. A prompt will ask for the
WIFI-201 ID, this is the digit code located on the back of
the WIFI module. Click "Connect" and now you will be
able to access the NeuLog software broadcast from the
WIFI module.
The next time the WIFI module is turned on it will again
attempt to enter client mode by connecting to the same
wireless connection. If the connection fails; the WIFI
module will restart back in access point mode.
V2018.01
24
Home
English