Publicidad

Enlaces rápidos

THANK YOU FOR CHOOSING SANUS
THE #1 TV MOUNT BRAND IN THE US.
VXT5 Instruction Manual
Scan for easy
install video

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Sanus VXT5

  • Página 1 THANK YOU FOR CHOOSING SANUS THE #1 TV MOUNT BRAND IN THE US. VXT5 Instruction Manual Scan for easy install video...
  • Página 2 TWO SIMPLE STEPS TO FINDING YOUR STUDS: Holding it vertically, lightly move the SANUS Pull apart the SANUS Magnetic Stud Finder to Step 1 Step 2 Magnetic Stud Finder up and down while expose the probing pin within.
  • Página 3: Lo Haremos Sin Estrés

    VXT5 We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 (UK: 0800-056-2853) We’re ready to help! Lo haremos sin estrés Si tiene preguntas mientras realiza la instalación, llámenos. 1-800-359-5520 (Reino Unido: 0800-056-2853) Estamos listos para ayudarlo.
  • Página 4 Does your TV weigh No — Perfect! more than 180 lb 180 lb (81.6 kg) including Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call (81.6 kg) 1-800-359-5520 (UK: 0800-056-2853) to fi nd a compatible mount. accessories? What is your...
  • Página 5 STEP 1 Attach Brackets to TV Parts and Hardware for STEP 1 WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
  • Página 6 1-1 Select TV Screw Diameter 1-2 Select TV Screw Length Hand thread screws into the threaded inserts If your TV has a flat back AND you want your TV closer to CAUTION: on the back of your TV to determine which the wall, use the shorter screws (a).
  • Página 7 1-3 Attach Vertical TV Brackets Align the vertical TV brackets over your TV hole pattern, and secure using your screw/washer (a) or spacer/screw/washer (b) selection. CAUTION: Avoid potential personal injury or property damage! The hanging tabs must face downward as shown. If your TV included Flat Back inset spacers or wall...
  • Página 8 1-4 Attach Horizontal TV Bracket Slide the sides of horizontal TV bracket to align with the vertical TV brackets Position horizontal TV bracket onto the vertical TV brackets by sliding the four bolts into the four hanging tabs. NOTE: Horizontal TV bracket does not stay in place until securing in step 3 on PAGE 9.
  • Página 9 Secure horizontal TV bracket onto the vertical TV brackets using the knobs NOTE: Slide horizontal TV bracket up or down to locate the mounting holes in the vertical TV brackets CAUTION: Avoid potential personal injury or property damage! The knobs must be installed to secure horizontal TV bracket onto the vertical TV brackets...
  • Página 10 5 in. (13 cm) between your device and the magnet. Please consult with your physician or medical professional prior to using this product. NOTE: Not all hardware included will be used. * Sanus Magnetic Stud Finder Wall Plate Template...
  • Página 11 24 in. (610 mm) spacing Locate a nail/screw in the studs using the Min. 16 in. (406 mm) Sanus magnetic stud finder provided. Find the edges of the studs using the probe of the stud finder Mark the centers of the studs with pencil.
  • Página 12 Level the wall plate template and tape in place. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. IMPORTANT : Be sure you mark and drill into the center of the stud.
  • Página 13 Partially install the top two lag bolts , leaving about 1/2 in. (13 mm) space from the wall. NOTE: This space allows you to remove the template and hang the wall plate onto the top lag bolts Remove the wall plate template ≈...
  • Página 14 Prepare the wall plate by sliding the wall plate covers up/down so the mounting holes are visible. Hang the wall plate on the top lag bolts. 10. Install the bottom two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate NOTE: Hold the wall plate in place when tightening the first bolt to keep the plate from shifting out of place.
  • Página 15 Level the wall plate template and mark the hole locations. NOTE: For assistance in determining wall plate location, see Height Finder at sanus.com. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
  • Página 16 Remove the wall plate template and insert four anchors CAUTION: Be sure the anchors are seated flush with the concrete surface. Partially install the top two lag bolts , leaving about 1/2 in. (13 mm) space from the wall. NOTE: This space allows you to hang the wall plate onto the top lag bolts ≈...
  • Página 17 Prepare the wall plate by sliding the wall plate covers up/down so the mounting holes are visible. Hang the wall plate on the top lag bolts. Install the bottom two lag bolts . Tighten all four lag bolts only until they are pulled firmly against the wall plate NOTE: Hold the wall plate in place when tightening the first lag bolt to keep the plate from shifting out of place.
  • Página 18 STEP 3 Mount TV to Wall Plate HEAVY ! You may need assistance with this step. Close wall plate covers. Make sure that the locking lever of the TV bracket is in the unlocked position. Wall Plate Cover LOCKED UNLOCKED Wall Plate Cover...
  • Página 19: Front View

    Hang the TV/bracket onto the wall plate NOTE: The TV/bracket can be slid anywhere along the wall plate for optimal positioning of your TV. Lock the TV/bracket onto the wall plate CAUTION: Avoid potential personal injury or property damage! Always make sure your TV/bracket is in the locked position so the TV is securely fastened to the wall plate FRONT VIEW...
  • Página 20 Adjustments LEVEL TILT Your TV should adjust Your TV should adjust easily when moved, then stay in place. easily when moved, Adjust the TV balance wheel if your TV naturally tilts up or down. then stay in place. Experiment with multiple revolutions first, then smaller rotation increments to fine tune the TV balance.
  • Página 21 TV LATERAL SHIFT REMOVING THE TV HEAVY HEAVY ! You may need assistance with this step. ! You may need assistance with this step. If you need to remove your TV from the wall NOTE: Use two people for this procedure, or remove the TV before starting. plate, disconnect all cables and then reverse Unlock the arm assembly by sliding the lock lever to the unlock position.
  • Página 22 Flat Back / Low Profile and your installation requires Use your TV supplied spacers and TV Supplied TV Supplied do not use the Sanus spacers Spacer Spacer NOTE: If using the M8x20 mm screws , you may or may not...
  • Página 23 For TVs that come with inset spacers or wall mount adapter rings, Rounded Back / Extra Space and your installation requires Use the Sanus spacers TV Supplied Spacers and longer screws. Do not use your TV supplied spacers. NOTE: If using the M8x35 mm...
  • Página 24 Features Expand the TV bracket to fi t TV hole patterns from 200 x 200 mm Conceal mounting hardware with up to 700 x 400 mm decorative covers for a fi nished look Align the center of gravity of any TV for 15°...
  • Página 25 Dimensions 27.56 700.0 [mm] 7.87 24.00 200.0 609.6 1.81 16.00 45.9 406.4 7.25 3.90 5.12 17.12 184.2 99.1 129.9 434.7 16.00 406.4 24.00 609.6 30.20 767.1 2.00° ROLL CONTROL 13.07 332.1 15.00° 31.88 3.44 809.7 87.3...
  • Página 26: Listo Para Comenzar

    ¿Su televisor pesa No — ¡Perfecto! más de 81,6 kg 81,6 kg (180 lb), incluidos Sí — Este soporte NO es compatible. Visite MountFinder.Sanus.com o llame al (180 lb) los accesorios? 1-800-359-5520 (Reino Unido: 0800-056-2853) para encontrar un soporte compatible. ¿Tabiques ¿Hormigón sólido...
  • Página 27: Paso 1 Colocar La Placa De Sujeción En El Televisor

    ESPAÑOL PASO 1 Colocar la placa de sujeción en el televisor Ver página 5 Piezas y elementos de sujeción para el PASO 1 ADVERTENCIA : Este producto contiene piezas pequeñas que, si fuesen tragadas, podrían producir asfixia. Antes de iniciar el ensamblaje, compruebe que todas las piezas estén incluidas y en buenas condiciones. Si faltan piezas o alguna está dañada, no devuelva el artículo al distribuidor;...
  • Página 28: Acople La Placa De Sujeción Horizontal Del Televisor

    ESPAÑOL 1-4 Acople la placa de sujeción horizontal del televisor Desplace los lados de la placa de sujeción horizontal para alinearlos con las placas de sujeción verticales del televisor Ubique la placa de sujeción horizontal sobre las placas de sujeción verticales deslizando los cuatro pernos dentro de las cuatro pestañas de montaje.
  • Página 29: Opción Para Montantes De Madera

    NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta Height Finder disponible en sanus.com. IMPORTANTE : Asegúrese de marcar y perforar el centro del montante.
  • Página 30: Opción Para Hormigón Sólido O Bloques De Cemento

    Nivele la plantilla de la placa mural y marque la ubicación de los orificios. NOTA: Si necesita ayuda para determinar la ubicación de la placa mural, utilice la herramienta Height Finder disponible en sanus.com.
  • Página 31: Paso 3 Instalar El Televisor En La Placa Mural

    ESPAÑOL PASO 3 Instalar el televisor en la placa mural Ver página 18 ¡ELEMENTO PESADO! Es posible que necesite ayuda en este paso. Cierre las cubiertas de la placa mural Cerciórese de que la palanca de bloqueo de la placa de sujeción del televisor se encuentre en la posición "desbloqueado".
  • Página 32: Solución De Problemas

    VER PÁGINA 18 Para televisores que vienen con espaciadores o anillos adaptadores para soporte mural insertables, y cuya instalación requiere un Dorso plano / Perfil bajo Utilice el espaciador provisto con su televisor y no el espaciador Sanus tornillo. NOTA: Si utiliza los tornillos M8 x 20 mm...
  • Página 33: Descripción

    Para televisores que vienen con espaciadores o anillos adaptadores para soporte mural insertables, y cuya instalación requiere un Dorso redondeado / Espacio adicional Utilice el espaciador Sanus y los tornillos largos. NO utilice el espaciador provisto con su televisor. NOTA: Si utiliza los tornillos M8 x 35 mm , puede que necesite utilizar las arandelas o no, dependiendo de la longitud del orificio para el tornillo.
  • Página 34 Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind.
  • Página 35 Learn ways to get the most out of your space. FACEBOOK.COM/SANUSSYSTEMS Find product updates and more. Learn installation tips, tricks and household know-hows. TWITTER.COM/SANUSSYSTEMS View step-by-step product videos to ease your install experiences. YOUTUBE.COM/SANUSSYSTEMS Find the latest news stories about your favorite SANUS products.
  • Página 36 If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! If you ever have questions about your SANUS product, give us a call at 1-800-359-5520. We're ready to help! ‘Monthly prize’...

Tabla de contenido