Echo SRM-265 Instrucciones De Instalación página 4

4
U-
16. Place throttle linkage (C) through adjustment fixture (N) and
install wire end into large carburetor throttle swivel hole (C).
Check throttle for freedom of movement and that wide open
throttle / low idle extremes are adjusted properly. The throttle
linkage must be adjusted by moving the adjustment fixture (N).
Consult with your Echo Dealer for correct adjustment proce-
dure.
17. Connect 2 ignition stop leads (A,B) from throttle cable tubing to
2 ignition leads (A,B) on engine.
18. Secure ignition leads against engine housing with clip (O).
19. Install air filter and cover
Install Hip Pad (Optional)
1. Attach hip pad to harness as shown.
C
HANDLE OMBO
K I
IT NSTALLATION
I
NSTRUCTIONS
N
A
B
C
O
O